fires but wont run w/6al box

[jc50942]

heres the deal..engine will fire and run until i try to give it any gas then it just dies. If i take the 6al box out of the picture it runs great. Double triple checked wiring. good grounds, 12.9 volts at constant and switched location, even tried a different box and still the same thing...tried a different coil..still the same thing. Also tried jumping the switched 12 volt wore to battery and nothing...any ideas?

[jc50942]

ready to run dizzy if that makes a difference on anything.

[Gaz64]

More info please.

Engine, distributor part number, ignition module p/n, carburettor.

Also engine modifications.

[msdtech1955]

how did you have the ready to run wired to the 6 series box?
zreadytorun.jpg

[jc50942]

Originally Posted by msdtech1955

how did you have the ready to run wired to the 6 series box?
Attachment 2165

pretty much the same as the attachment you have...except mine doesnt have the orange wire...just red and black. Its a procomp 7000 distibutor.

[msdtech1955]

so you have the red from the pro comp to ignition and the balck from the pro comp to the white wire.

[jc50942]

Yes...going by pro comp instruction sheet

[jc50942]

I had a guy tell me that I had to bypass the module inside the distributor ?

[msdtech1955]

You have a part number on that thing.

[jc50942]

All I know is its the pro comp 7000 ready to run distributor.